News

One Solver for All Mach Numbers and Flow Conditions Flow regimes between Mach numbers from 0 to much larger than 1 can simultaneously exist in the computational domain. FlowVision’s general Navier-Stokes solver is...

Start/stop FSI without MpCCI FlowVision combined with SIMULIA Abaqus offers unique co-simulation capabilities for solving strongly coupled fluid-structure interaction problems. While the ultimate accuracy is attained through smooth data exchange between the solvers,...

Since 2004, FlowVision is capable of handling the calculations where there are geometries moving with respect to the calculation domain. FlowVision allows moving bodies in 6-DOF. The movements can be based on user definitions or fluid...

Introduction FlowVision's Clearance/Gap model provides fast and accurate solutions to problems where ultra-fine clearances exist (down to 1 micron) in the computational domain. The clearances may be dynamic or static and they will be...

Why Advanced? Work with Real Phase Interfaces through SGGR In the traditional approach, free surface regions are defined by VOF (volume of fluid) ratios ranging from 0 to 1 and as a result the...

Why we need lossless CAD in CFD? The Sub-Grid Geometry Resolution (SGGR) technology allows FlowVision to import the CAD file to the computational domain without any feature loss, thus both saving man hour...

Initial Grid FlowVision’s mesh generation can be defined as a two stage process. It starts with initial grid which is built by the user in the minute when CAD is introduced. In FlowVision Initial...