News

Dhio Research and Engineering Private Limited > News > News

May

TWO DAYS HANDS ON WORKSHOP ON ELASTO-PLASTIC FRACTURE MECHANICS (EPFM)

Category:

TWO DAYS HANDS ON WORKSHOP ON ELASTO-PLASTIC FRACTURE MECHANICS (EPFM) 3D Crack Growth : Theory & Simulation 5-6th July 2024 @Virtual Engineering, Rajajinagar, Bangalore ABOUT WORKSHOP This workshop introduces theoretical fracture mechanics –...

May

TWO DAYS HANDS ON WORKSHOP ON LINEAR ELASTIC FRACTURE MECHANICS (LEFM)

Category:

ABOUT WORKSHOP This workshop introduces theoretical fracture mechanics covering LEFM approach with dynamics of crack initiation, propagation, and failure. Workshop also explains factor in predicting the Stress Intensity Factor (SIF); Consideration of crack...

Apr

Two Days Hands on Workshop on Composite Material Characterisation and Property Development Concluded

Category:

Two Days Hands on Workshop on Composite Material Characterisation and Property Development Concluded on 11th and 12th April 2024 at Rajajinagar, Bangalore Workshop Highlights: What an incredible two days it has been at...

Feb

RubberCAE India 2024 – Concluded Successfully !

Category:

Dr. R Mukhopadhyay Inaugurated RubberCAE India 2024 Conference Bangalore, India - January 28, 2024 - RubberCAE India 2024, a premier conference focusing on Rubber Testing and CAE Simulation, is set to start from...

Sep

Webinar on Thermal Fluid Simulation of Control Valves using Flownex

Category:

Join our upcoming webinar on Thermal Fluid Simulation of Control Valves using #Flownex. Date : 09-Nov-2023 Time : 02.00 pm - 03.00 pm Link to register : https://lnkd.in/gs-qb-46 #Agenda - Introduction to Flownex...

Sep

Webinar on Thermal Fluid Simulation of Pump Transients & Sizing using Flownex

Category:

Join our upcoming Webinar on Thermal Fluid Simulation of Pump Transients & Sizing using Flownex Date : 22-11-2023, Time : 10.30 am - 11.30 am Link : https://forms.office.com/r/4zgmat7NVn #Agenda - Introduction to #Flownex...

Sep

Webinar on Thermal Fluid Simulation of Boilers & HRSG using Flownex

Category:

Join our upcoming #Webinar on #Thermal Fluid Simulation of #Boiler & #HRSG using #Flownex Date : 08-Nov-2023, Time : 02.00 pm - 03.00 pm Link to Join : https://forms.office.com/r/NPdM71VMZG #Agenda; - Introduction to...

Sep

Webinar on Composite Material Characterization using Multiscale.Sim

Category:

Join our free Webinar on Composite Material Characterization using Multiscale.Sim Link to join : https://forms.office.com/r/uG5KgF7nX3 Date : 08-11-2023 (8th Nov 2023), 11.00 am - 12.00 noon Email : nls@dhioresearch.com +91 8618908683 Agenda -...

Sep

Webinar on 3D Crack Growth Simulation under Sub-critical Crack Growth Conditions (Fatigue, SCC, Creep) using FRANC3D

Category:

Join our upcoming Webinar on 3D Crack Growth Simulation under Sub-critical Crack Growth Conditions (Fatigue, SCC, Creep) using #FRANC3D Link to join : https://forms.office.com/r/EHCFdvNeZZ Date : 9th Nov 2023, 11.00 am - 12.00 noon Email...

Apr

Webinar on Motor Cooling Simulation – Faster and Efficient way of motor cooling simulation using Particleworks

Category:

Join our upcoming webinar on Motor Cooling Simulation – Faster and Efficient way of motor cooling simulation using Particleworks #Particleworks – Mesh Free CFD Simulation code Developed by Prometech Japan and used worldwide...

TWO DAYS HANDS ON WORKSHOP ON ELASTO-PLASTIC FRACTURE MECHANICS (EPFM)

TWO DAYS HANDS ON WORKSHOP ON LINEAR ELASTIC FRACTURE MECHANICS (LEFM)

Two Days Hands on Workshop on Composite Material Characterisation and Property Development Concluded

RubberCAE India 2024 – Concluded Successfully !

Webinar on Thermal Fluid Simulation of Control Valves using Flownex

Webinar on Thermal Fluid Simulation of Pump Transients & Sizing using Flownex

Webinar on Thermal Fluid Simulation of Boilers & HRSG using Flownex

Webinar on Composite Material Characterization using Multiscale.Sim

Webinar on 3D Crack Growth Simulation under Sub-critical Crack Growth Conditions (Fatigue, SCC, Creep) using FRANC3D

Webinar on Motor Cooling Simulation – Faster and Efficient way of motor cooling simulation using Particleworks

Products

Our Gallery

USEFUL LINKS

Get In Touch