- This event has passed.
Two Days Hands on Workshop on Composite Process Simulation Manufacturing
September 26 @ 10:00 am - September 27 @ 6:00 pm
> Two Days Hands on Workshop on Composite Process Simulation Manufacturing
Composite Theory & Simulation based quality Improvement
Date: 26-27th September 2024, Venue: Hotel IV-Sanctum, Gandhinagar, Bangalore
> Topics Covered (Theory & Practical)
- Composite Material Design and Characterisation
- Fundamentals of Composite Manufacturing Process, Challenges Associated with Process, Quality
- Composite Manufacturing Simulation
- Processing of Polymer Matrix Composites : Interface in Polymer Matrix Composites
- Metal Matrix Composites Processing : Interfaces in Metal Matrix Composites
- Processing of Ceramic Matrix Composites : Interface in Ceramic Matrix Composites
- Carbon Fiber/Carbon Matrix Composites
- Fundamentals of Computational Techniques to manufacturing process simulation
- FEA /Micromechanics Interface : Export fiber orientation, anisotropic mechanical property, stress and pressure simulation results to structural analysis software. Validate the structural performance of products and mold sustainability.
- Material Characterization : Evaluate curing kinetics under temperature variations. Evaluate viscoelastic properties, chemical shrinkage and thermal expansion effect/ Evaluate the permeability and porosity of fabric layer.
- SMC/BMC/GMT/D-LFT Compression Molding: Visualize dynamic melt flow advancement during compression molding process / Evaluate chopped fiber orientation prediction, compression force response and anisotropic warpage result for SMC/BMC/GMT/D-LFT compression molding / Predict potential molding defects, such as flashing.
- Resin Transfer Molding (RTM): Predict resin flow behavior through anisotropic porous media / Decide appropriate fabric materials and optimize process conditions / Control resin infusion by pressure or flow rate / Capture cure reaction trend during molding through viscosity and curing kinetics models.
- Prediction of Fiber Orientation, Length and Distribution, Evaluating the filler effect to Mechanical Properties and Final Shrinkage, Process Condition Optimization to Improve Strength