J. von Rickenback, F. Lucci, P. D. Eggeschiler, D. Poulikakos, “Pore scale modeling of cold-start emissions in foam based catalytic reactors”, Chemical Engineering Schiene 138, 446-456, 2015.
J. von Rickenbach, R. Lucci, C. Narayanan, P. D. Eggenschiler, D. Poulikakos, “Multi-scale modelling of mass transfer limited heterogeneous reactions in open cell foams”, Int. J. of Heat and Mass Transfer 75, 337-346, 2014.
M. Otter, G. Athanasopoulos, N. Hlubek, M. Montagnese, M. Labois, D. A. Fishman, S. Singh, D. Lakehal, J. Giapintzakis, C. Hess, A. Revcolevschi and et al., “Optical probing of anisotropic heat transport in the quantum spin ladder Ca9La5Cu24O41
D. Caviezel, M. Labois and D. Lakehal, “LES of Turbulent Thermal Mixing in Circular and Square T-Junction Configurations”, ICHMT International Symposium on Advances in Computational Heat Transfer. July 1-6, Bath, England (2012)
B. Aboulhasanzadeh, S. Thomas, M. Taeibi-Rahni, G. Tryggvason, “Multiscale Computations of Mass Transfer from Buoyant Bubbles”, Chemical Engineering Science Volume 75, Pages 456–467 (2012)
M. Icardi, E. Gavi, D. L. Marchisio, M. G. Olsen, R. O. Fox, D. Lakehal, “Validation of LES predictions for turbulent flow in a Confined Impinging Jets Reactor”, Applied Mathematical Modelling 35, 1591–1602 (2011) Download Here
M. Icardi, E. Gavi, D.L. Marchisio, M.G. Olsen, A.A. Barresi, R.O. Fox and D. Lakehal, “Investigation of the flow field in a three-dimensional Conned Impinging Jets Reactor by means of micro PIV and DNS”, Chemical Engineering J. 01/2011, 166(1):294-305 (2011)
G. S. Theodoridis and J. Rasoul, “Three-Dimensional Numerical Simulation Of The Natural Convection In An Open Tilted Cubic Cavity”, I. Conf. Applied Mechanics, Materials and Manufacturing ICAMMM, Sultan Qaboos University, Oman, December 13-15 (2010)
D. Lakehal, F. Thiele, “Sensitivity of turbulent shedding flows to non-linear stress-strain relations and Reynolds stress models”, Computers & Fluids 30 (2001) Download Here